SPECIFICATION OF PORTABLE ACP TOILET CABIN

• BASE : 75mm x 40mm M.S. pipe , cross member of 40mm x 40mm M.S. pipe, mounted with 18mm marine ply and vinyl flooring.




• ROOF : Top outer curved type M.S. 1.2mm(18swg) plain sheet welded with M.S. Frame structure, top inner decorated with 9mm MDF board.




• CAGE STRUCTURE & WALL PANEL : MS Frame work with square pipe & wall thickness 50mm.
  EXTERIOR WALL : M.S. 1.2mm. Bended sheet welded on M.S. Frame. INTERNAL WALL : 9mm. MDF board.




• INSULATION : All void within the external wall, inner wall & roof are filled with R.B. Glass Wool of 50mm. thick, which posses a rare combination of lower thermal conductivity & high resistance to moisture & heat.




• DOOR : Frame work of 30mm x 30mm square pipe external wall made by M.S. sheet & inner wall decorated with 9mm. MDF board & suitable locking system.




• PAINT : All components are washed thoroughly with epoxy thinner, joints filled with carpage and then painted with epoxy red oxide both outside/inside & then painted with two coats of epoxy paint. (This is done to give a aesthetic look to the cabin and it also has a longer life compared to other paints.)




• PLUMBING : All plumbing work will be concealed and fitted with accessories.




• ELECTRICAL : All electric wiring will be concealed & fitted with modular switches & sockets, fans, tube lights & bulk head light above the door will be provided.